200 gr Accubonds

Discussion in 'Reloading' started by longgunshooter, Jul 13, 2006.

  1. longgunshooter

    longgunshooter Well-Known Member

    Messages:
    165
    Joined:
    May 19, 2006
    hey im interested in getting some info on what fps has been the most accurate for these.

    i will be shooting them out of a 300WM, 26" barrel.

    (EDIT)::what about seating depth.

    typically i have the BT's off .030.should i expect the AB's to be any different.

    Thanks!
     
  2. 300winnie

    300winnie Well-Known Member

    Messages:
    133
    Joined:
    May 18, 2005
    I am shooting them at an average of 3,038 fps and getting m.o.a. accuracy of my 26" tube .300 Winnie.
     

  3. NorthernSniper

    NorthernSniper Well-Known Member

    Messages:
    150
    Joined:
    Jul 31, 2003
    For me it was 2875fps 26" barrel 70.6gr R22. Good Luck
     
  4. magicofmt

    magicofmt Well-Known Member

    Messages:
    441
    Joined:
    May 9, 2005
    76.5 gr of H-1000 and getting 2825 fps and great accuracy in 300 WM in 26 in heavy barrel-Savage. Norma Brass fed 215 GM primers.
     
  5. longgunshooter

    longgunshooter Well-Known Member

    Messages:
    165
    Joined:
    May 19, 2006
    what recipe you follow'n?
     
  6. winmagman

    winmagman Well-Known Member

    Messages:
    1,379
    Joined:
    Mar 13, 2003
    Win brass, Fed 215 primers, and 71 grs. RE-22 = 2950fps out of a 26" factory Savage 300 WM. Shoots .5 to .7 inches at 100 yds.
     
  7. Chawlston

    Chawlston Guest

    With my 30/338 Lapua in a 265" barrel, I am getting sub .200" groups at 100 yards right at 3200fps using an Oehler 35P. But, I unscrewed the barrel and replaced it with a .338 Lapua that shoots the 225 Accubond at 3240 and the groups are consistently sub .25moa at 500 yards.

    Chawlston
     
  8. ATH

    ATH Well-Known Member

    Messages:
    855
    Joined:
    Oct 7, 2003
    I'm running 74gr Re22 under them and getting around 3000fps (only shot 2 over the chrono so far so no solid number). I don't have a group on them with that load yet, but at 72.9gr they were about .45" out of a factory Sendero.
     
  9. jwp475

    jwp475 Well-Known Member

    Messages:
    2,595
    Joined:
    Feb 4, 2005