Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
2 polish a chamber?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Savagebien" data-source="post: 293506" data-attributes="member: 10955"><p>use a small wooden dowel with a slot cut in one end about half an inch down the middle. wrap a small piece of 400 grit paper around it. touch it to the bottom of the chamber while the barrel is spinning in a lathe, pushing it forward slowly until you feel it touch the shoulder and then come back with it, repeat until the chamber is very shiny inside, you can also use some kerosene on the paper to help speed it up. thats how i have done it.</p></blockquote><p></p>
[QUOTE="Savagebien, post: 293506, member: 10955"] use a small wooden dowel with a slot cut in one end about half an inch down the middle. wrap a small piece of 400 grit paper around it. touch it to the bottom of the chamber while the barrel is spinning in a lathe, pushing it forward slowly until you feel it touch the shoulder and then come back with it, repeat until the chamber is very shiny inside, you can also use some kerosene on the paper to help speed it up. thats how i have done it. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
2 polish a chamber?
Top