2 Extra Barrells

Discussion in 'Gun Parts - Stocks, Barrels, Actions, etc.' started by DCGS, Jan 3, 2013.

  1. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    I have a couple of extra barrells for sell. One is a 7mm, 8.5 twist, fluted, finished at 28 inches, Brux 15 palma. The second is a 6.5, 8 twist, fluted, finished at 26 inches, Benchmark 5 contour. 450.00 shiped to you. Dan
     

    Attached Files:

  2. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    6.5 Sold pending funds. Thanks Dan
     

  3. JohnMill

    JohnMill Active Member

    Messages:
    41
    Joined:
    Apr 4, 2011
    Muzzle diameter on the 7. Is that 450 each.

    Thanks
    John
     
  4. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    Muzzle dia on the 7 mm is .820. Yes that is 450.00 each for sure!!! Dan
     
  5. jett

    jett Well-Known Member

    Messages:
    245
    Joined:
    Feb 14, 2006
    The 7mm is twisted perfect for the 195 Bergers! lightbulb
     
  6. marioq

    marioq Well-Known Member

    Messages:
    1,656
    Joined:
    Jan 7, 2012
    How heavy is that 7mm??
     
  7. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    I think it will weigh 4 1/2 lbs. Can weigh it in the morning but I am not off much. I will go on Brux's web site and see for sure. Thanks Dan
     
  8. marioq

    marioq Well-Known Member

    Messages:
    1,656
    Joined:
    Jan 7, 2012
    I did after I asked.. sorry to waste your time.. It 5.5 lbs
     
  9. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    According to Brux they estimate it to weigh 5 to 5.5 lbs st 30 inches. This one at 28 inches weigh's 4 3/4. I have built a lot of guns with this barrell and in an A 5 and a nightforce the gun will weigh 12 1/2 to 13 lbs.
     
  10. k8hvntn

    k8hvntn Active Member

    Messages:
    34
    Joined:
    Jan 5, 2013
    ill give 425 for the 7mm Through brux the barrel is 300 and 110 for fluting.
     
  11. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    425.00 plus shipping of your choice. I just added the cost of shipping which Brux will do also. Dan
     
  12. marioq

    marioq Well-Known Member

    Messages:
    1,656
    Joined:
    Jan 7, 2012
    I'll take it !!
     
  13. DCGS

    DCGS <strong>Official LRH SPONSOR</strong>

    Messages:
    491
    Joined:
    Dec 5, 2007
    7mm Sold pending funds. Dan
     
  14. barnesuser28

    barnesuser28 Well-Known Member

    Messages:
    2,808
    Joined:
    Mar 2, 2012
    Dan, what is the approximate wait time for a Brux 7mm barrel right now?

    Thanks,
    Riley