11 deg. crowning tool

Discussion in 'Rifles, Bullets, Barrels & Ballistics' started by johnnyk, May 3, 2005.

  1. johnnyk

    johnnyk Well-Known Member

    Messages:
    1,731
    Joined:
    Dec 24, 2001
    Does anyone know where a 11 deg. hand crowning tool can be gotten at. I've tried doing searches for Pacific Tool and Gauge and Klymer Reamers. No luck so far. Thanks. JK.
     
  2. Fiftydriver

    Fiftydriver <strong>Official LRH Sponsor</strong>

    Messages:
    6,848
    Joined:
    Jun 12, 2004
    Go to MidwayUSA as they carry most of the PTG tooling and generally it is in stock for shipping.

    www.midwayusa.com

    Good SHooting!!

    Kirby Allen(50)
     

  3. Richard338

    Richard338 Well-Known Member

    Messages:
    126
    Joined:
    Aug 22, 2003
    Pacific (Kiff) has them, they are under Gunsmithing tools. www.pacifictoolandgauge.com
    Brownells also has them (I think they call it a 79-degree crown cutter)
    Check on the max barrel thickness for any cutter you order. I heard that Brownells is only 3/4"
     
  4. johnnyk

    johnnyk Well-Known Member

    Messages:
    1,731
    Joined:
    Dec 24, 2001
    Kirby,
    Thanks. I just found something on Brownell's website. Part # 080-586-750 (3/4" 79deg crown cutter). What is/are your procedure for cutting an 11 deg crown? Johnny K.
     
  5. johnnyk

    johnnyk Well-Known Member

    Messages:
    1,731
    Joined:
    Dec 24, 2001
    Thanks Rich. I was spelling gauge as guage, duh.