Cart is empty
Track my order(s)
Atlas Bipods fill my own personal needs for a higher quality, quick detachable bipod. The quality is simply superb. So I became an Atlas dealer. Read the LRH feature article review HERE.
- Len Backus -
The 5H Atlas Bipod BT35-LW17 is the long-awaited, larger, heavy-duty bipod for large, heavy recoiling guns from .338 to 50 cal.
Easily installed with the press of a stainless steel plunger, the Spikes deliver a singularly aggressive foot to support the bipod. The Spike portion is... More →
Read reviews (4)
If your rifle stock only has a single sling stud and you don't want to add a 2nd anchor, then this is the rail for you
Read reviews (3)
The PSR Atlas Bipod is the new and improved version of the hugely popular Atlas Bipod.
Read reviews (2)
This BT47-LW17 model is the new taller version and includes the quick-release mechanism.
This rail is similar to the BT34 but one end has a slot to allow for some flexibility in the distance between anchors. The BT49 – 2.05" 1913 Rail has a center to center spacings 1.2 - 1.6".
I personally use this Atlas model. I have 2" picatinny rails mounted on all my rifles and I can quickly swap my one Atlas Bipod between them all.... More →
This Atlas Bipod model is meant to stay mounted on your rifle but can be removed almost as easily as a Harris. Two screw clamp included. Very slightly... More →
Read reviews (5)
If your rifle stock has 2 sling studs spaced from 1.76" to 2.78" apart then this BT15 3.35" 1913 Rail will work. It has a relieved base to accommodate curved surfaces, but can also be used on stocks with a flat surface if needed.
Read reviews (1)
This is the Atlas Bipod rail that you may want to use for a new installation if your front sling attachment consists of a flush cup on the side of the... More →
This Atlas Bipod leg extension kit gives you 3 more inches of height. - Len Backus -
Easily installed with the press of a stainless steel plunger... More →
The Atlas Bipod Pouch is designed to accomodate any of the Atlas bipod models except the longer BT47 and includes compartments for leg extensions... More →
Read reviews (1)
Used for mounting 1913 rails (our part numbers BT15 and BT17) consists of two (2) 10-32 T-Nuts and two (2) 10-32 x ¾" Button Head Cap Screws.... More →
The BT17 - 4" 1913 Rail will accommodate sling stud hole patterns with a center to center spacing of 2.2" – 3.5". It has a FLAT base to accommodate... More →
Easily installed with the press of a stainless steel plunger, they provide a fully articulated aggressive foot for the Atlas Bipod. Weight 2.1 ounces.
"The Long Range Hunting Store really takes care of their customers! Thanks Guys for a GREAT..."
– Shannon W, 02/16/2016
"Your selection of products geared (no pun intended) to the long range crowd is great! I'll be..."
– Bill2089, 03/05/2010
"This was my first order from Long Range Hunting Store and communication and fast shipping was 5..."
– Bill S , 06/12/2015
© 2001-2016 Long Range Hunting, LLC. All rights reserved. Powered by Longrange Hunting