Recent content by William W.

I bed a bit forward. This shows the clay bedding block and the piece of plastic that I used to raise the barrel for the first step of casting the lug support.

The rifle was an earlier version of my much-modified 308 "deer gun" whose only remaining original part is the Remington Action. After several seasons of threading by flashlight a "top-off" into the internal magazine to replace the round chambered after safely entering my blind, organizing my...

Best tasting deer I have shot was a “deer-of-the-year” whose size was hidden because his head and heart were on one side of a large tree and his give-away tail on the other side of the tree. 180-grain 308 Accubond destroyed his heart and bled him out by by the time I walked the 60-yards up to...

I may be removed for this, but down deep some of y’all might agree…how about a hunting stand on a border property whose owner is fed up with “traffic issues”, property damage, and just plain old-fashioned fear from the coyote’s perpetually climbing or cutting through the big fence for human or...

I have its twin with the synthetic stock with the same 2-10 Nikon scope and shade set up the same way.

Too bad that they are no longer made. Smooth action; mine still has the original stock and I solved the problem of interfering iron sights and sunshade. I shot my first bison with it.

At 79, my dream hunt is another 8-point, or bigger, buck at a TN wildlife Management Area on public land. My buddy and I hunt hard in November. My favorite hunting rifle is a self-bedded and self-Cerakoted 308 Remington with a Brownells 20-inch barrel installed by a gunsmith. The deer was...

The circular primer handling system in the 650 works just fine. I prefer it to the cheap 750 system with the movable spring-loaded rod that likes to jump off the runners"

I wish that I could be hunting elk at long range, but 300 Norma Magnum is my favorite cartridge that I am getting into. Working up a load for Hornady's AL-tipped 250-grain bullets which I acquired on sale. Had to machine Dillon’s attempt at a 338 Lapua shellplate and have been waiting 2-years...

With a 20-inch 308 barrel, 180 Nosler Ballistic-Tip (i.e., green-tipped) tboat tails in front of 45.5 grains of VVN550 @ 2596 fps

Racks of “03” Springfields in the 80’s gun shows.

6.5x47 Lapua / 6.5 Creedmoor 308 300 WM 300 Norma Magnum 375 H&H / 375 RUM

I always use Badger Max-50’s with 3-screws on each side.

You won’t have this problem if you process all newly acquired cases with Brownells CARBIDE PRIMER POCKET UNIFORMER

You won’t have this problem if you use Brownells CARBIDE PRIMER POCKET UNIFORMER.