Use a handheld GPS. Fix the shooting point and then go to the app in the GPS where you search for a fixed point in the database. Once you run that it gives you a distance and direction to that point. Now go to the target point and you can then move till you have the correct distance or close to...
I am a land surveyor and have checked my Garmin Etrex 20 against my survey GPS that gives 20mm accuracy. It differed 3m. That should be good enough to first fix your shooting point and then the set out your target point once you are close to the distance.
Most survey apparatus with a laser...
The pressures that QL calculates when the speed is used are not very accurate. Speed will be a good barometer, but with new propellants the speed norms for calibres are being exceeded by large margins. I normally calculate nodes that give 50-55K psi for hunting purposes. For target shooting the...
I do not adjust the weighting factor as that reduces pressure when lowered. If you have info where pressure has been measured then you can calibrate and amend the WF so that pressure agrees. Very few instances have however occurred where accurate pressures are available, so I stick with the...
Essentials :-
1. Select calibre and bullet type. Change bullet length if different from actual measured.
2. Change barrel length to measured from cocked bolt to muzzle tip (ignore muzzle brakes)
3. Measure case capacity and enter.
4. Enter COL as used - from tip of bullet to base - this...
Although case hardening is only addressed after 3 to 5 firings, the newer annealing processes make it easy to do. The advice is to do it after each firing to ensure consistency on all the cases. The work hardened cases have extra spring back that can stop chambering.
As a product provider I was impressed by the honesty and pride in his product. No BS promises as to delivery times. You guys are lucky. We foreigners are sucking the hind nipple.