Recent content by Tommy T

Kenton industries they make them for the leica there good scopes I’ve used them for many years now

Altus rifles are in around the Alabama and Florida line north of PC

Nine run gun he’s one of the best in South Georgia and Joe walls in Jacksonville Fl

I shot a deer buck at 200 yds running in a 30 nosler at 200 yds it destroyed it

You can’t go wrong with a 30 nosler it had a lot of power and the most energy

I have had good luck with V V N560 around 2960 to 3000 in a 24” benchmark 81/2 T

I use the retumbo powder on 210 and the 205 on the 235 hammers I use n560 and they Al, shoot 1/4” at 200 yds I have 3 -30 noslers ,one is made by quarter minute magnums in Idaho and one is made by Barbour creek Tim macworter long range shooting in Alabama and one is by nosler good luck you will...

I have 2 of them with 24” barrels and I use factory Hornady ammo with a muzzle break not much recoil at all , they are around 9 lbs with scopes on them good luck happy hunting

I have 2 of them and I shoot Hornady factory ammo in them either a 24” barrel with a brake on then not much recoil at all they are around 9 Lbs with scopes

I shoot the 205and the 208 Berger’s in my 30 nosler loaded out long like a prc length ,I use retumbo 83.6 guns. Of powder and VV N560 works great

I have a Bartlein 26” carbon barrel and all of my shooting buddy have carbon barrels in the 6.5 Prc from 20” to 26” and they all shoot great out to 1200 yds I have 55.6 gns. Of RL 26 but the Hornady eld match works great as well

I’m loading 175 Berger’s in a 20” Bartlein and I have them load to the max load and getting only 2821 FPS out of it with a 24” benchmark barrel I’m getting 2965FPS loaded to max VV N560 powder

Check out unknown munitions I have around 10 of there breaks and they work great

I use a 337 mandrel on the inside of my necks and that’s all I do and use just a neck sizing die ,I shoot 235 hammers and it shoots great out 700 yds with once fired brass by nosler . good luck on loading it