I just finished building a 6.5G2 on a 24" Krieger barrel a few months ago. I've got about 150 rounds through it. I'll be chorographing some rounds in the near future. I've got a thread on the gun with pictures somewhere on this page.
Just this last weekend I finished up the first 100 rounds of factory ammo. I'm finding the Hornady 123 AMAX's will group around .8-1.0 moa. The Alexander Arms 123 Lapua Scenar will do about the same. Nothing too impressive with the factory ammo, but not bad either.
I also had a chance to...
I got the barrel from a local gunsmith. His big buisness isn't Grendels, but 6mm Fat Rat which is essentially a Grendel necked to 6mm with the shoulders blown. Lee Wells from Accurate and Reliable Rifles. Great guy to work with. He'll build whatever you want.
I finally finished my Grendel last week. Build list:
24" 1-8" Heavy Varmint Krieger
Alexander Arms Hard Use Bolt
APA Little Bastard
17" JP Enterprises tube
Harris Bipod
Standard Brownells BCG
Matched Bushmaster uppper/lower
Magpul PRS
Timney 3 pound single stage trigger
American Defense...
I’m still in the planning stages of a 6.5 Grendelbuild. With a 24”, 1-8” twist barrel, Ibelieve I can reasonably expect 2600 fps muzzle velocity (123 gr Amax). That equates to roughly 1500 fps at 800yards.
What I’m wondering is what people see for the expansion of target bullets...
For a 120 gr SMK Sierra lists 42.0 gr IMR4064 3000 fps.
http://www.northfloridashooting.com/Misc/Reloading_260remington.pdf
I'm pushing max velocity for a similar bullet, less powder to do it though...
Some background information for everyone.
Lapua's gun lists an 18 3/4" barrel, 1-9" twist.
My gun is a 27" barrel with a 1-9" twist, so I know it won't even be close to apples to apples.
I started out using the 123 gr SMK, since that was the closest weight/profile I could find. As...
g0rd0;
Thanks for the tip.
My question//confusion/concern really arises from the fact that Lapua lists their fastest load for this bullet at 2759. My load (yes, with a different powder) is 228 fps faster. So, in a nutshell is going that much faster over the manufacturers load an issue or...
My Rifle:
260 Remington
VZ24 98 Mauser action
27” 1-9” twist Shillen barrel
Timney Featherweight, 1 1/2#
My load:
Cal: 260 Remington
Powder: IMR 4064, 39.0 gr
Primer: Standard Winchester Large Rifle
Bullet: 123 gr Lapua Scenar
Story:
I got a last minute call to do some shooting at...
I was never able to get 4350 to shoot well with my 1-9" .260 under the 123 gr SMK. I'm sure I'm the only one that's ever had this trouble before because 260 shooters rave about 4350.
I've tried about alot of powders and while I'm still in the load development phase I'll say I've had the best...
Hey Guys/Gals!!
I need some help.
I have access to a range for one day only with steel set up at 200, 500, 800and 1k. My issue is I'm out of my go-to 123gr SMK with only the 123 gr Lapua toshoot at this one day range event. Has anyone tried H4831 and IMR4064 with the 123grLapua HPBT in a 260...