Recent content by ragnarok

Ive been shootin these at about 600ft above sealevel, cant remember the pressure, i had a 0.5moa group size 5 shots from 200m out to 1250m, i shot a 5 shot group at 1225 wich was a good 6". I dunno why they are not stable in yours?

Sounds great, ill buy a kit and see how it turnes out then, ive gotta 10"twist, thanks for the reply

I bought my 375vm2 3 years ago, and i e shot 7-800 rounds with it, tested all kinds of bullets at various distanse, best bullet combination so far is the cutting edge 377gr mtac bullet with 164gr og vith20n29 powder this gives 3325fps and no pressuresigns, and is extremely accurate. Ive tested...

The muzzle blast is quit large, somewhat a good amout over a 338 lapua. Ar 500 plates under 10mm gets dentet, ill guess to shot in the same hole/aera might go through at 600 meters. ive shoot through 1" of hardened steel plate at 200 m and 3/4" soft steel at 400m. the rabbit I shot at 300...

here is one :) ready to go. And some chronograph shooting. And a picture taken this winter shot at 1225meter with the CE377Gr bullets

I shoot these CE 377gr bullets at 3300 fps, using 163 gr of vith 20n29 powder. I had 3358 with the same load but 0.020 jump, which gave to much pressure. im using a 38" barrel.

I had the same problem in my 375VM2, I had to set my bullets deeper in the casing, I needed a jump of 0.035" from the rifling/chamber throat to the seal tight band. that took care of the pressure signs. now I seat them so the "ring" is just barly visible. according to CE you can seat the...