mtbullet1's latest activity

6.5x55 on modern action

i bought several old US Govt desks at auction (cheap) rock solid and have strong drawers on both sides

@FEENIX, the cost of going from 3.25" mag length to 3.4" on a Mauser '98 is another consideration if you want to go 338WM, the bolt...

My very first build when I learned gunsmithing was a Mauser '98 switch barrel. It is a Brno VZ24 action in 257AI & 338-06, both barrels...

338-06 or 338-06 AI, less work than 338 wm, reliable feeding.

I just talked to my gunsmith this morning and he only has the 1-7 twist in stock. I will have him order a 1-7.5 twist.

I hope you are pleased with your choice. I would not want to be in the barrel manufacturing business because any disappointment or...

Those guys put out a lot of bad info about McGowen barrels among other things.. I've literally used 6 McGowens now and every single...

The reason to anneal is not for case life, although this can be a side effect, it is for the sole reason to uniform neck tension, which...

Do it in a dark room and you'll see the glow Annealing greatly benefits brass that is not uniform. If you have fresh...

If you get ANY red colour, you are heating too much… I suggest you get yourself some tempilaq and learn it’s uses first. Cheers.

I know , testing was how I discovered new b/c, my point was “check for new info”

just a heads up on NEW B/C figures. pulled older .222 out to recheck loads from the past using sierra #1330 50 gr, with H322, check...

I like to put a 30deg bevel on a flat crown. I feel like it protects the crown from cleaning rod damage, especially on the big magnums...

Looking at the muzzle I doubt that there is anything magic about the angle. From an engineering viewpoint the most import job for the...