Recent content by mjls4me

if you do have base and ring problems the ultra mag is not very forgiving on regular run of the mill rings and bases i suggest a solid picatinny rail with aheavy set of rings with across bar in them nightforce has some of the finest mounts made and always use lock tight the mounts are just as...

if you are using this as a hunting rifle and will be using these loads for hunting full length size them as for what your brass looks like if theve only been fired once from your rifle their probably fine i always use the trim to length i have a 300 ultra that shoot ity bity bug hole groups and...

i dont think you will get a standard 7mm up to 3000 fps with 180s i shoot both a 7mm and a 300 ultra 168 barnes tsx shoot great in my 300 at 3400 fps and shot slam thru a 10 inch oak at 650 yds about the 7mm even if its an ultra mag i think you may have pressure issues if you get a 180 that fast...

also im using a 26 inch bull barrel pillar bedded and acraglassed into a fajen thumbhole stock i have nightforce mounts and a nightforce nxs 5.5x22x50 with npr1 recticle works great and shoots even better some groups come out as ragged hole in 3/8" range im just looking for a little advice...

can any one give some info on this whats better g7 or g1 im shooting a 300 ultra with 168 gr barnes tsx rifle averages about onehalf inch groups i think the .404 bc for this bullet is incorrect because my rifle shoots flatter thany any of the calculators im using say