Recent content by MariusClaudiu

  1. M

    For all you 30-06 owners, what bullet are you using?

    Hi again Today i was check again my blaser r93 and i was shot with : Hornady sst 165gr - 48,5 gr vv n140 - 810 m/s Nosler BT 165gr - 48,5 n140- 810 m/s - 84,25 mm Nosler BST 168gr factory ammo - 845 m/s but i did make it longer a little bit , from 84,15 to 84,25 mm ( 84,15 was factory ) Nosler...
  2. M

    For all you 30-06 owners, what bullet are you using?

    Hi I use this combination on my blaser R93 For 165 - 168 gr = 56gr N550 For 178 - 180 gr = 53 gr N550 But you have to find firs your best COAL And after that to find the best weight of powder In the past i was use for 150 - 168 gr N140 And for 180 gr N160 But with N550 push them more harder...
  3. M

    Reloading tricks

    Thank s a lot for your advice. I was thinking to do that it s possible to broke my gun and sure to be not safe for the shooter.
  4. M

    Reloading tricks

    Hi to all Did have somebody any experience with this ? A reloader guy told me to try to make hole larger ( 3 mm - 3.2 mm ) between primer chamber to powder chamber on the brasses and to use CCI BR primers. What do you think ? Will help on something ? I mean accuracy or other + things Or will...
  5. M

    208 ELD’s and Retumbo in the 300wm

    Ok Thank s a lot
  6. M

    208 ELD’s and Retumbo in the 300wm

    When i shake the cartrige make sounds the powder On first lot not sounds .
  7. M

    208 ELD’s and Retumbo in the 300wm

    I did try other lot of H1000 Whith the new one i did found the same 77.5 gr of powder will get less volume in the same brass . With the first lot, powder was almost up to the neck case . Now it s 1 - 2 mm down How it s possible ? Will affect me for accuracy ?
  8. M

    208 ELD’s and Retumbo in the 300wm

    Yes I agree Thank s
  9. M

    208 ELD’s and Retumbo in the 300wm

    Yes Ok My barrel now it s 24 So i think it s fastest enough With 80 gr h1000 i did get 2950 fps but was not accurate enough for me But that charge was 0.010 to the lands and my gun work ok with 0.030 to the lands
  10. M

    208 ELD’s and Retumbo in the 300wm

    Ok Good enough for me I use viper vortex 4-16x50 scope With bdc reticle and 1/2 moa turets for elevation My balistic program show me for 1100 yds 28 moa My scope let me 36 moa So it s ok I will not try longest because here in my area it s enough I intend to put targets from 500 to 1100 yds to...
  11. M

    208 ELD’s and Retumbo in the 300wm

    Hi again Today i test some charge So i did find very accurate charge but unfortunatly not fastest 2825 fps 0.030 to the lands 3622 77.5 gr H100 208 eld-m Cineshot brass ( RWS ) I din not make picture for my group but was 0.2 moa 3 bullets in one hole. My question is how long will be useful ? I...
  12. M

    30-06 , Nosler BT 165 gr , VV N550

    Blaser R93 30-06 , 22 inch barrel Hornady SST 165 gr 56 gr VV N550 COL 3248 2950 fps 0.5 moa
  13. M

    .243 win Blaser barrel

    Hi I did get a blaser barrel in cal .243 win Not new but in very good condition. 20 inch and 1:10 twist I did try factory winchester sp varmint 80 gr ammo Did shut wery bad Put the bulets all over the target 5 - 6 inches one to the other I did try also Hornady v-max 75 gr Barnes ttsx 80 gr...
  14. M

    30-06 , Nosler BT 165 gr , VV N550

    My intention it's to try share to others my results , to help find others also wery close node to mine. I supose this it's the purpose of this forum. I was inspire from other uk forum ,wich a guy did find a same result with a sako 75 hunter in same calibre , but with hornady interbond 165 gr...
  15. M

    30-06 , Nosler BT 165 gr , VV N550

    Yes Exactly 3 bullets in a hole to 100 yds Maximum efective range 650 yds i mean For hunting
Top