Recent content by live2huntmt

One sold to quailybirds....one still available

Price Drop. $900 plus shipping

Bump

(Two each) Vortex PST Gen II 5-25x50 SFP EBR-4 (MOA). 30mm Vortex Precision Matched Rings (low), Vortex Low-Pro bubble level, and Vortex neoprene cover. Both come in their original boxes. $900 + shipping (each).

Bushing

I was trying to save money and not buy a set of competition shell holders. Instead, I adjusted my die height on my Redding type s full length die to produce .002” shoulder bump. I therefore have a gap between the die and shell holder, and no cam over on my forester co-ax press. After...

you lost me Dusty...you attached a link to the seater die and not a bushing sizing die.

I see Redding makes a custom competition bushing neck sizer die with an adjustable micrometer on top to adjust the height of the bushing. How critical is the bushing height? On my Redding FL bushing dies, I place the bushing with the numbers down, screw in the top and back it off 1/16 of a...

*Update* I got my rifle back from my gunsmith with its new 8-40 screws(no pins). It is currently curing with Acra Glass Gel bedding the rail with NO release agent on the action...this is the the worst feeling in the world! I hope I don’t regret this later!

I checked my front screw length by installing only the front one and it tightened the rail to the action...I was worried because it only engaged for 2.5 turns. I then removed the rail and checked to make sure the other three screws were able to go all the way thru the action, and they could...

can I pin the rail myself?

my gunsmith doesn’t seem to want to pin the rail but said he will thread them to 8-40. Do you think this will be enough?

I definitely do not want to epoxy my rail to the action!

no...just a front rest and rear bag