Kcollins01's latest activity

I have two of them one in 6 Creed and another in 6.5 PRC, I just ordered a 7 PRC this afternoon. I went with Taperless 750 on all three...

Will do

Have them lap it….will save you from doing with your bullets…unless you plan to use the David Tubbs lapping bullets…I use them all the...

I’m thinking about going ahead and getting it lapped. Only 65 dollars might be worth it down the road

Preferred Barrel Blanks is certainly good to go. I had a 308 win barrel spun up by them and it really is a tack driver. My barrel was...

Every bullet I’ve tried in the 25-06 has dropped them in where they stood. Besides a 85gr Nosler ballistic tip it ran maybe 10 yards

I settled on 115 gr partitions (older, sleeker style) over IMR 4831 at 3100. It was deadly.

Sounds like a deadly combo. I run the 115gr ballistic tip Nosler out of mine at almost 3200 with retumbo

What length barrel and how fast did it push them?

I had a 25-06 1:7.5tw built from them. Shot great. I tried some 120gr Hammer Hunters in it and it handled it very well.

https://www.longrangehunting.com/threads/any-recent-preferred-barrel-blanks-reports.354494/

I planned on trying some of hammers options out of it. And they recommend a 1.7

7 Twist is kinda fast, unless you plan to shoot monos. My 1-8 does great with the 134 ELDs/133 EOL

Looking at getting a couple 1.7 twist 25cal blanks from pbb. Wanting to have my smith build a couple 25-06ai. I’ve seen a lot of great...

Lance, l will be dropping off parts to AxisWorks on Friday to build one of these 25 PRC SI bad boys! Liddy