Recent content by Jasbo

You can Carry Concealed in US National Parks! Of course your permit(s) must be valid for the State the NP is located. Example; as IL resident I have a Non-Resident Utah CC permit which I use when fishing in Yellowstone NP (Wyoming & Montana). California is anther matter…I don’t enter that...

G’day Magnum, Does the caution “make sure it does not fill the space behind the tang” mean do NOT bed the tang or do not bed between the rear pillar and the tang? Regards.

Good tactics stated! I carry high quality breathable rain-wind gear. For pants I have full length leg zippers which facilitate getting over field pants and boots.

.243 Win because Lapua brass availability. Savage M10 .243 Win 22" 9-1/2 Twist 75gn Hammer Hunter Tipped 41.5gn Varget MV 3599fps. At 400 yds 2499fps 1040 lb-ft KE. 1/4 Turn Lee Factory Crimp Die. Accurate and stable.

Sorry omitted cartridge is .243 Win.

Savage M10 22” 9-1/2 Twist 75gn Hammer Hunter Tipped 41.5gn Varget MV 3599fps. At 400 yds 2499fps 1040 lb-ft KE. 1/4 Turn Lee Factory Crimp Die. Accurate and stable.

Welcome from SW Illinois! This is THE Answer Place!

Welcome from SW Illinois! Interact here, you won’t be disappointed, many legitimate experts.

Sure you’re not running 62.8gn H1000 behind those 175gn ELD-X?

Thank you for giving .22LR and 12ga. Note I stipulate 3-1/2” chamber. My favorite 5: 243Win 260Rem 7mm08 Rem 7 SAUM 338 RUM

This from HAMMER BULLETS website, “Hammer Hunter line is our long range or high bc line of bullets. This was the original line of bullets. These bullets all have 1.5mm hollow point and are typically 60%-70% weight retention.” Welcome from SW Illinois!

I’ve got one-hundred dollars for this cause from SW Illinois. If tickets are still available, I can Zelle or mail a check. Just let me know. Jasbo

Sorry Geo! Primer is Rem 9-1/2M. COAL is 3.8765. I’ll build a worksheet so I don’t repeat these omissions. Thank you for managing Hammer load data.

338 RUM REM 700 BDL LH 26” Twist 1-10 ADG (new) LADDER H4350 86.3 3146 85.1 3065 84.0 3044 82.5 2986 80.7 2909 All charges above 80.7 had high pressures indicated because firing pin profile / diameter and diameter of bolt face FP hole was piercing or extruding primer cup into bolt face and...