Recent content by hunting hard

Okay thank you Vince for the additional information. Is Very worth considering.

I’m thinking of not loading these brass anymore, I will just as well buy Lapua brass which is cheaper ( than the ADG) in my area here in Canada. $259.99 for 100 pcs Lapua compared to $135 50 pcs of ADG.

I will fire the factory ammo and then reload and fire one more time before measuring the case

Thank you. I’m very grateful with your insights. Okay I’ll try to buy a factory ammo, fire and then reload once and then measure the headspace. Yes, I did chamfer and deburr the case mouths. As for the headspace comparator, I’m considering of ordering the LE Wilson Case Gage Depth Micrometer as...

Hi to all. Anybody having issues with new ADG brass not chambering? I just bought a new box of ADG brass to reload for my new Sako S20 and when I tried chambering the brass, all except 4 will not chamber. I measured the base to shoulder, using Hornady comparator, and there’s .006-.007...

I have one and I use it every 3 rd or 4th firing in my 300 WM brass. I just chamber fired cases and use the collet die on the ones that wouldn’t or hard to chamber.

Been using Remington brass for my 300 WM and 30-06 and no complaints at all, no loose primer pockets even after 5 firings.

Hi Ptosis, so you used 34 mm ( MEDIUM) rings with a scope having a 50 mm bell objective and there is still enough space for a 56 mm objective. My scope has a 30 mm tube diameter with 56 mm bell objective, do you think I can also use MEDIUM rings too? Thanks in advance