Hudge76's latest activity

They have been great to deal with over the years, no issues and fast shipping.

Blue collar reloading is awesome! I started reloading in 2019 and was only buying locally until the Vid hit. Being in AK, I only order...

Honestly I couldn’t tell you. When I was retiring, the unit over them, was having several buildings torn down at all of the sites.

I was Air Force and used to write some of the contracts for the AF to run the Long Range Radar Sites before I retired in 2018. I know...

Probably a Savage 99 .308 Win. I always wanted one after seeing my uncle’s, so I found one online at Gunbroker many moons ago. Got the...

Not the new ones. They are both marked with 1:8 on the barrel. Tikka says 8” and I’m pretty sure the RemArms one say 1:8.

I have my dad’s .243 Win in a Rem 742 and then bought a Savage 99 about 5 years ago in .243. I’m not a fan of the Savage as it’s not...

I’ve had several different AR’s over the past five years and different barrels. If you just want to plink and are ok with 2 MOA, get a...

I can’t confirm, but I’ve heard BCA makes the AR Stoner battles for Midway.

Did you measure the shoulder of the brass after you resized it? I think your shoulder may not be bumped back enough.

Well I switched from RL26 to RL23 and kept everything. Else the same and got good results.

Hybrid 100V and Barnes 110 gr. TTSX

After firing the brass I measured the shoulders and they are the same as my fired factory 6.8 Western brass. The overall length though...

For loading, I took a once fired 6.8 piece of brass and made a modified case from it. With it, I took the bullet I wanted to load and...

So, my process was to trim it and then FL resize the brass in my 6.8 Western dies. As I mentioned, I made the overall length of the...