Here is some pics from my gun. I actually dont have the stock anymore. Sent it back for the second time to boyds and waiting for them to get all the bugs worked out. The first pic is where my safety sits after installation. The second pic is me trying to pull the safety back as you can see...
Hammer11
II have two options you either file down the little red BB or you take a very small screwdriver, like one that is use for fixing eye glasses, and pry the red BB out and then drill out the hole slightly deeper so the BB is flush with the stock. Be careful if try the prying option...
You can pop the little red bb out and drill the hole a little deeper so it is flush with the stock and your safety will work. I talked with boyds technician today and he thinks savage has manufactured two bmag guns ls since the release with slightly different dimensions that is why people are...
Ya I did the sanding in the front and I have complete clearance but it still won't clip in. What I meant by my last post is sanding the top of the clip opening, basically where the clip hits the top of the stock??
I also did a little work to allow the clip to slide in properly however my clip will not fully seat. Basically the plastic lever that hold the clips doesn't clip i. Did you have to sand the top of clip open so the clip could properly clip in?
I just got my stock in today and input it all the together but it appears that the slot for safety slide is not deep enough and I cannot engage the safety. I have a call into to boyds but still have not received a call back. Anybody else have this problem?