Recent content by Ekupp

What do you have in mind for a trade? Ideally prefer cash. Please see an attached pic of the model.

Lightly used SoundGear in ear noise cancelling ear plugs. SoundGear Instant Fit specs: Suppresses noise at 93 dB 25 dB NRR 15 dB of Amplification CIC (Completely-In-The-Canal) Uses: Hunting, Tactical Shooting, USPSA, 3-Gun, Sporting Clays, Trap and Skeet

Lightly Used: SoundGear Instant Fit specs: Suppresses noise at 93 dB 25 dB NRR 15 dB of Amplification CIC (Completely-In-The-Canal) Uses: Hunting, Tactical Shooting, USPSA, 3-Gun, Sporting Clays, Trap and Skeet Our complete kit comes in a convenient carrying case and contains: One (1) pair...

Selling my used Wiser mount for a Magnetospeed V3. Shipping included to 48 states.

After chasing my tail on this, it became apparent that I had another issue with my brass. The sizing die was creating a belt on the base of some of the cartridges. The pieces that were not sizing at various increments of annealing were having this issue. I was having to crank down the dies to...

Designed for advanced dry fire training Convert your AR-15 in 20 seconds Adjustable shot indicating 780 nm IR laser SIRT-AR Bolt works with your upper on your lower Replaces your bolt carrier Universal to fit all Mil-Spec AR Triggers NOT compatible with Colt AR/M4's that have Full auto selectors...

Let me ask my question another way, for those of you using an AMP how much variance do you get in Cartridge base to shoulder when sizing after annealing? Assume: same brass lot, same chamber, same press, same die, same number of firings, same lube, dies cleaned periodically, same hold time in...

In this case all brass was 2x

Cartridge Base To Shoulder is the dimension I am looking to get consistent sizing without too much hassle.

Gingerman: I agree, the ones that have me scratching my head are the ones that come in undersized. They can be set aside and loaded as foulers and will fireform back to normal size. Incrementally annealling longer in controlled .1s gets rid of the stubborn ones, mostly. My goal in...

Do you think the harder to size ones were fired at one point at max/over pressure while doing load development?

Yes all same chamber

My primary goal in annealing is to get consistent full length sizing. What I have noticed with certain sets of brass is that after annealing 70% of cases will be +/- .0005" of my target. 15% will be stubborn and not size and 15% will under size by .002-.004. As an experiment I kept annealing...

Los Angeles