Recent content by Dry Powder

Thanks Clark. It seems that the expander is the root of most case prep problems perhaps even at the point of manufacture. I will be sure to avoid them as much as possible. I think I will try turning the necks on the new cases and see if that helps. Next I will fire-form what I have loaded and...

Hi Boomtube, Thanks for the reply. I sure hear alot of good things about the Lee Collet Neck Sizer. I don't have one yet but it is starting to look like I am gonna need one. Let me ask you this: Would the Lee Collet Sizer improve the run out on new cases? Would the Lee do better than using...

Hi Mark Thanks again for another good reply. I am glad to hear that your process finally worked. After I try a full length sizing if I don't get straighter cases I will go ahead and turn the neck. At this point the neck walls do check very consistant in wall thickness. Following that I will...

Hi Mark, Thanks for your reply. I have been reloading for many years but recently decided to move up to the next level in reloading precision, man it's a whole new ball game. It is frustrating to buy such high-end dies etc. and know that I will not achieve the precision I wanted right off the...

Hi gang I am new to the forum and have some technical questions on Rifle brass cocentricity. I just purchased a new Savage 12BVSS in 22-250 and 200 new WW Brass cases. I also have a new Redding Competition Bushing type die set. (Neck die, Body die and Seating die) I did the following to the...