Might be a bit off topic but the last 3 factory rifles I have bought shot sub moa out of the box. Weatherby Vanguard 6.5 CM. Tikka T3 7MM Rem Mag and Mauser M18 6.5 PRC. Begs the question why roll the dice with builders or High dollar factory
My biggest problem with the my Mylabradar is the person on the adjacent point shooting with a brake. Even with sensitivity set way low their shots will set it off. Solution 1. shoot the brake shooter, 2. Get the inertial trigger. Wanted to do 1 ended up doing 2. Good results there after.
I would go 1 in 10 worked well for my m1A and 40 x shoot every thing sierra made from 155 to 190 out of them. my 2 fav bullets were the 155 Palma and the 175 smk for long range
I got the standard long distance lenses when my cataracts were fixed. Right eye ended up 20 20 left needed slight correction to get to 20 20 am good to go driving without glasses. Found is easier to wear glasses all the time than to keep up with reading glasses. I can see iron sights much better...
You can always load the .308 down to 30-30 level velocities and significantly reduce recoil. I you do and stay at 150 grain would recommend using a bullet designed for 30-30 to get proper expansion and performance at that velocity range.
IF you are still in the market, doubt you will do better than the $500 Eurooptic M18 mauser in 6.5 PRC mine shot sub MOA at 100 and 200 right out of the box with Hornady Precision Hunter.
https://www.eurooptic.com/Mauser-M18-65-PRC-22-Synthetic-5rd-Mag-Bolt-Action-Rifle-M18065P.aspx
it is the quad mount from the lab radar sight u use 1 1/4 PVC conduit for the legs and custom cut to length should be able to find the conduit at lowes homedepot or other building supply place once you get the quad pod from Labradar website. It also talks about the conduit if I misquoted
for ARs can u just velcro strap the trigger to the receiver or the foreend? Or just use a steel mag and the magnet. Some pics of mounting would be helpful.
I often shoot at public range and find the guns on either side tend to set the labradar off even with sensitivity turned down...
with my M1A back in my high power days 4 loadings was pretty normal before signs of incipient head separation. If lucky got 5 loadings out of GI brass. Had to trim every time as I was making the die contact shell holder every time I sized. Brass did not last long but rifle functioned...