Recent content by Dave Kiff

I had several folks on this form that sent me messages and call asking if we would make the steel Sako TRG trigger guards that we made for Serengeti again and the bolt in Aluminum Stealth TGR Sako / AI ( TGR not to be confused with TRG )and Winchester Model 70 Stealth detachable type that use...

Sinarms , Bear , Hired gun as always I thank you for your support and friend ship . You know for all the folks out there building rifles or having rifles built,I don't think a lot of folks under stand how important the reamer design is and the time it takes to manufacture/ grind a reamer to a...

The best extractor for the standard face PTG or Rem. bolt is the Mini 16. I designed that to be the width of the Sako extractor with the cross pin strength of the M-16. Our .062 bolts now have a full length .062 pin race way like the Stiller and Bat bolts. We discontinued the old style Aluminum...

If you need a reamer ground or designed as I have done every day for the last thirty years, you will do three things if you want a rifle that will shoot as good as you can read the wind . First seat a bullet in a primer less case (dummy round ) send it in with any specifics like neck size or...

I have seen barrel's range from .2755 to .278 on 7MM / 284 . The CIP ( European ) barrels are the smaller bore .2755 . The average after market Barrel runs .2767 plus or minus . That's why we make .0002 bushing sets and individual .0001 bushings . I sure wish I could guess the size of bore a...

SAAMI calls for the go at min. and the no go at pluss .010. Since the millitary calls + .010 a max field gage. Years ago Red Elliotte, Kieth Francis, P.O.Ackely and my self being taught by these gents changend most all shops to adapt to better chambers and I still teach this today . A go is min...