Recent content by crout

  1. C

    What company makes a .223 bolt gun with a 1:8 or more twist?

    yep just a couple of the 12 series are 1-7" the rest are 1-9"
  2. C

    What company makes a .223 bolt gun with a 1:8 or more twist?

    savage makes a 1:7 it will do whatever the 1:8 can do and more.
  3. C

    Hunt coming up, about 1000 meters expected

    Just thought i'd bump it up incase anyone missed it.:D
  4. C

    Time between shots

    depends on the rifle. for my heavy barrel 223 i will shoot my 5 shot group and do it in whatevre time i feel like. not very scientific but when i go shoot gophers i don't wait several minutes beteeen shots. sometimes it's 5-10 in the space of 5 minutes then i'll sit for 10 minutes? i don't...
  5. C

    bullets for stevens .223

    tell the guy to give you 10 and see if they stabalize. from what litle i know you need a 1-8" twist for 80gr pills. 69gr pill would be ideal in your rifle.
  6. C

    best gun for coyote and bobcats

    for economical purposes i think a 223 would be ideal. send a 75gr or 80gr amax at 2900fps and you're good out to and past 500yards. with more than enough knock down power. if money was no issue something in 264 would be great as well. send a 139gr scenar or 140gr amax at 2800+fps and you're...
  7. C

    30-06 to 1000yds

    stick with the 150gr bullet in the 30-06 and you should have enough steam to get to 1000yards. if you want to use the 180gr bullet you had better be able to get the velocity up pretty high or the bullet will loose too much energy, even at 500 yards to is 200 ft-lbs LESS than the 150gr bullet.
  8. C

    fired formed brass life?

    I just finished annealing 350 casing this afternoon. i used the youtube method, sort of. i put my torch in a vise(gently). used a socket that fit in my 3/8 drill so the open end could accept my 223 case. then spun it in the flame. did a 4 mississippi count and tipped the warm casing in a tub of...
  9. C

    fired formed brass life?

    this guy has a good method. he also recommends annealing before cartidge conversion/fireforming. YouTube - Annealing Brass
  10. C

    fired formed brass life?

    try anealing the case neck after you fireform and see if that doesn't increase the brass life.
  11. C

    Lapua brass in Kalispell, Montana

    awesome info, i'll give them both a call.
  12. C

    Lapua brass in Kalispell, Montana

    Can someone tell me where I can find some lapua brass at. I will be going on a road trip near Kalispell and was hoping to find a store that sells brass.
  13. C

    140gr 6.5mm nosler custom comps.

    Has anyone used the new nosler custom comps in the 6.5mm diameter. just wondering how well they group. i guess I can't complain at the price..but are they as good as the sierra matchkings/ berger/lapua scenar etc.. I know they're cheap but it's nosler we're talking about.
  14. C

    am I dreaming

    not concerned with velocity as i can load the 6.5x55 to match the velocity of a 6.5x284 I believe 51gr of R-19 in 23.6" barrel will get me to about 2900fps with 140gr bullet. I guess my biggest concern was accuracy. and bullet choice. as far as i know nobody has these bullets for sale in...
  15. C

    am I dreaming

    First off I'm a newbie to this forum and real newbie to reloading and long range shooting/hunting. I have a rifle that I would like to use for long range varmint hunting but I would appreciate some feedback. I recently perchased a steyr sbs prohunter..stainless.23.6" barrel. in 6.5x55, which...
Top