Recent content by coyotezapper

  1. C

    How is StaBall 6.5 working out?

    22GT 88 ELDM.
  2. C

    ATHLON MIDAS TAC 6-24X50 MOA

    SPF to Nomad458
  3. C

    ATHLON MIDAS TAC 6-24X50 MOA

    FS is an Athlon Midas Tac 6-24x50 riflescope FFP with APLR4 reticle. Condition is used but in excellent condition. The Burris rings and MKM throw lever is included. I will link below to this scope below for actual details of the scope. I will mention that I purchased this scope after finding out...
  4. C

    Reloading 7mm PRC

    Mine is QL also. The difference is OAL and bullet - 180 hybrid for mine at 3.60" OAL. The other was 180 vld at 3.34" OAL. Big difference in pressure when you can add more powder.
  5. C

    Reloading 7mm PRC

    24" will work fine. With N570 load 180 to 3025ish fps (around 77 grs) 3.60" OAL 63K and fine tune from there. This is based on a case capacity of 84.5 grains and 70 degrees with an OBT of 1.228. A different temp and case capacity will affect these numbers somewhat. This will give a 98.5% burn...
  6. C

    Reloading 7mm PRC

    What is your bbl length and case capacity?
  7. C

    Newb with my NF NX8 4-32

    I knew this was coming. Laughable.
  8. C

    Newb with my NF NX8 4-32

    Where did I say there wasn't a difference??
  9. C

    Newb with my NF NX8 4-32

    Nobody ever said there wasn't a difference in eye relief at low and high magnification, in fact if you look at my first post I said to set your eye relief at high magnification. 🤣
  10. C

    Newb with my NF NX8 4-32

    Then its not set up right. I got the 2.5-20 even though the internet said the eyebox was finicky. I had no problem getting it set up. Eye relief issues are operator error. Threads like this leads to false information. LRO did a review of both scopes and also had no issues.
  11. C

    Newb with my NF NX8 4-32

    A good scope like the NX8 properly set up will work at all magnifications.
  12. C

    Newb with my NF NX8 4-32

    Try putting your scope where the magnification ring is right above the trigger and then fine tune from there. Fine tune it on max power.
Top