Recent content by Ah1356

56 should be safe for H1000 and a 180gr bullet at magazine length. I think I went up by 0.3gr increments. Go slow and be careful as always.

62 grains oh H1000 gets me 2,990 from a 28-in barrel with Berger 180 hybrids. Haven’t messed with 195s yet.

Just bustin’ your chops Rich. No worries. Cheers - Aaron

I hope you’re right - “this month” ends tomorrow. :-)

I’m just getting started, by my 7SS is an 8 twist. Fireforming loads are sub 1/2MOA at 100 and show great promise at 1,000. Can’t wait for dies so I can really see what she can do...

I don’t know much about the Gunworks can, and I am no expert, but here’s my free advice: My suppressor is an Allen Engineering AE30, and it is excellent. It is also heavy and requires a non-standard muzzle profile. Most people want light and standards threads. If you have a Proof carbon...

The POI shift is not really related to MV, at least not in the obvious way. The can is not causing the bullet to go slower and hit lower. In general the suppressor can add a little speed, so if velocity were the primary cause here it would hit higher. I haven’t studied it formally, but I...

You are hanging a weight on the end of the barrel, and that will change the harmonics unpredictably. It might create a big POI shift, or a small one, or none, but in general heavier suppressors and flexible barrels have the potential for greater POI shift. I have an 18-in .308 and a 26-in...