Recent content by 6.5 Remington

I too have had issues with Nosler Brass! I have a 27 Nosler built 1 1/2 years ago that I loaded 30 Nosler in until I got 27 nosler brass new!! On either the first or second firing I got almost complete case seperation on nearly all cases fired!! I contacted nosler about this issue and sent...

Very nice work !! I too like a challenge

Good evening Mr .Young! I’ve looked over your post and your dilemma on which carteridge your looking to build on! I have both the 28 as well as 27& 26 Nosler and the 7 mm STW! The 28 is an off the shelf rifel but the 7 STW was a custom I found in my loading process that the 28 is as finicky to...

Here’s another thought for your buckled cases ! I’ve used the RCBS collet bullet puller going up 1 cal and tighten down over the brass neck! This works real well with the bullet in place ! Once the case is drawn out go back to cal and pull the bullet ! Then anneal and reset bullet to Proper OAL

Hello there! I see your looking for a coating for barreled action and your bolt ! I have a solution to your problem! And you can do this your self !!!!! I have used this product with great success !! If you can shake a can of paint then you can do this your self!! It’s called Duracoat ! You can...

welcom too the world of hand gun hunting! You mentioned you are wanting to use the 6.5 tcu! I have been using the contender pistols for many years ! The 6.5 being one of my favorite of all there is to shoot! I have a super 15 “ barrel and I’m using Reloader7 @ 23.6gr and Hornaday 100 gr...

I’ve been reloading for over 30 yrs! I have used every possible bullet known to man! Except The Berger bullet! Recently I had a Remington 700 rebarreled to the 280 AI. I could not find a suitable bullet in my repatoir that I was happy with the results! I can’t get 1/2 in or better I m not...

As I understand it ! They have a no question’s asked policy! I have sent a couple of rifel and pistol scopes for various reasons and have had not a single issue with the work that’s been done

If you’ve never owned a weatherby rifel before!!!! Here’s a little insight from the 8 that I own !! It will drive you nuts ! I’ve been shooting for 40 + years and I shoot so many different caliber’s and manufacturers !! But a weatherby rifel still befuddles me !!!!!!! You can shoot 2 rnds in 1...

In response to your 27 Nosler brass! I too have had issues with this particular caliber! I have bought a total of 5 boxes because the first 2 were junk! I attribute that to the new caliber ! I also have a 26 Nosler and haven’t had a single issue with that brass! But the 27 brass has some...