Kestrel help

Korhil78

Well-Known Member
Joined
Jun 22, 2011
Messages
3,572
Location
New Mexico
I have a few questions about the kestrel 4500 that are driving me nuts. Under the baro screen, I have the ref altitude set to 0. The baro shows up as 25.63 and changes from different times in the day. Now I know that is not correct because my station baro is always at 29.something. Do I need Togo into the baro calibration and set it to what my actual station pressure is at the present time?

Another question is if I set altitude to zero on the baro screen will I still be able to get the altitude off of the altitude screen? Or am I missing something here?

This is driving me nuts!
 
Two questions:
How do you get the Shooter App for Android (used to connect, via Bluetooth, to Applied Ballistics) to work consistently? Whenever I need it it's not connecting.
Would you share your findings in working through your original question?
Thank You
 
Two questions:
How do you get the Shooter App for Android (used to connect, via Bluetooth, to Applied Ballistics) to work consistently? Whenever I need it it's not connecting.
Would you share your findings in working through your original question?
Thank You

Sure..I don't know about the android as I have the IPhone.

But on my kestrel4500..I went to the baro screen and set "Ref Alt" to 0. That gave me what the already calibrated sea level baro was. As you go up or down (if you live in Louisiana) in elevation the baro pressure will change accordingly. So it doesn't really matter what your altitude is. Now in your shooter app, to be able to use the baro pressure from your kestrel without worrying about altitude, you have to switch "pressure is absolute" to "on". This will allow you to enter the baro pressure into shooter but takes away the place to put in altitude(which you don't need doin it this way). This matched all my drops out to 1300 yards so far.

Now this is just being nit picky but if you just want to know your altitude on your kestrel for giggles then go to the altitude screen and adjust your altitude to whatever your GPS says and then your kestrel will start tracking it accordingly.

I hope this helped. I tried to explain it as simple as possible. The other threads that I tried to read were about like trying to understand applied physics. I just played with it until I figured it out and ten asked someone if that was how they did it.
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top