My New Defensive Edge LRKM

Broz

Well-Known Member
Joined
Feb 3, 2007
Messages
8,636
Location
Townsend, Montana.
Just rolled back in from Defensive Edge with my new LRKM.
Can't wait to start working up a load and getting her lined out.
Shawn did some initial testing in Hornaday brass that showed a happy load with 300 Bergers and an average velocity of 3192 fps. I have some Lapua brass that I feel will allow it to go 3200 with no problems. That remains to be seem though.
I have 126.5 moa of up travel zeroed at 100. If I get 3200 fps. I will be able to dial to 2980 yards with no hold over. That is the extent of my PLRF10 range finder. Worked out pretty good!!
Here are some Specs.
Defensive Edge LRKM chambered in .338 Terminator +P
Bat Action
32" Kreiger barrel and 5 port DE slab brake
Harris 9~13" swivel bipod with pod lock
65 moa custom DE rail
NF UL 3 screw rings
NF 5~25 x 56 ATACR with MOAR reticle
Here are a few pics.
Jeff
002800x600_zps38f4802b.jpg

003800x600_zps66b70757.jpg

005800x600_zps2a79c0ec.jpg

006800x600_zpsb4e8a64d.jpg


010800x600_zps1de39702.jpg

013800x600_zps6dd6b29b.jpg
 
Nice! I am sure that it works out well but since I and most have never fired one, how do are you able to keep a solid cheek rest while working the action. I'm sure it would be easily explained with a video but I Havnt seen one yet as these are so new. Is it a bit awkward? Do you have to move your shoulder at all to work the action? Looks awesome and will be cool to see the testing done. Paint scheme looks really good too.
I like how it makes a 32" barrel look like a 26" barrel as well.
 
It is a single feed. So I won't be cycling the bolt while holding a cheek weld. I have lost interest in repeaters and have been using all my rifles in single feed form for a few years now.

Jeff
 
Yessir, I figured it was a single feed by looking at it. A lot of shooters like to keep the same cheek rest position when shooting so I was just wondering. That surely answers my question though. I have come to like single feeds as well. I have started transitioning over myself. Sure looks like you are going to be having a lot of fun here in the near future.
 
Very, very nice rifle Jeff! Two questions. 1. Is that a formed case in the picture? and 2. I thought you said you were going to put an Atlas on it instead of the harris, did you change plans ir is that an upgrade for the future?

I expect to see a "Hits at 3000 yards" thread by the end of next month..... :D gun)
 
Very, very nice rifle Jeff! Two questions. 1. Is that a formed case in the picture? and 2. I thought you said you were going to put an Atlas on it instead of the harris, did you change plans ir is that an upgrade for the future?

I expect to see a "Hits at 3000 yards" thread by the end of next month..... :D gun)

Yes, that case is formed in a test chamber and I think it was fired in the rifle too.

I want to try an atlas but decided to wait until I can crawl behind one in person before I pull the trigger. I am having a little issue with rail mount thing. I am afraid it may not be as stable as the cradle used in the Harris design. But that could be just in my head and I will see when I get the chance to look at one somewhere.

Jeff
 
Yes, that case is formed in a test chamber and I think it was fired in the rifle too.

I want to try an atlas but decided to wait until I can crawl behind one in person before I pull the trigger. I am having a little issue with rail mount thing. I am afraid it may not be as stable as the cradle used in the Harris design. But that could be just in my head and I will see when I get the chance to look at one somewhere.

Jeff
Got ya! You better compare the magnetospeed with your Oehler in this rifle too, can never have too much data! lightbulb
 
Great looking rig Broz,
Looking forward to hearing of your success with it. I am sure there will be plenty.

Can you tell us about your scope/ring/rail set up. How much elevation travel do those NF ATACR scopes have. That's some handy dial up!
 
Very Very Nice Jeff :)

You must be very happy with it :D

I bet you get cranky with your PLRF10 now as I have :rolleyes:

The ATACR is the problem with around 130 internal moa elevation :cool:

Looking forward to seeing how it goes, certainly plenty of room in the case for powder with the long throat, very nice.
 
Warning! This thread is more than 9 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top