Picatinny Mount ??

BrentM

Well-Known Member
Joined
Jan 10, 2013
Messages
4,329
Location
Meridian, Idaho
6.5-284 is the rifle I am shooting and wanting to change the mount.

I have two basic questions. Aluminum or steel? Recoil Lug or not?

My current pic mount is a aluminum weaver 0 MOA.

Scope is a NF 5.5-22 x 56.

Seems like Badger is the only with a recoil lug and it is 148.00. The rest, in steel, NF, EGW, I have looked into have no recoil lug and are under 120.00

Please help.
 
NightForce..all the way. Just ask at least 75% of the big name guys on the BB here.:D

For that rifle you dont need anything more than an EGW Al rail and they are "about" $48 from the website
 
OK, so aluminum should be stout enough for this combo is what are telling me. Perhaps my current alum mount is fine then.
 
I've been using Aluminum EGW bases, and Aluminum TPS TSR rings for several years, and they have been just fine for me.

You don't have to have the most expensive. Price doesn't always mean better quality. Granted, more often than not, yes...But in this case, the EGW and TPS combo is honestly the best I've found for the budget-minded individual. And they really are precision equipment and VERY strong.

I use the HD bases and HD rings for the extra strength, just to be on the safe side. Both EGW and TPS list them with the HD designation, just FYI, so you can distinguish the regulars from the HD models.
 
OK, so aluminum should be stout enough for this combo is what are telling me. Perhaps my current alum mount is fine then.


Might very well be stout enough. Since your speaking of a LONG range caliber...does your mount or scope..?...allow you enough elevation to get the distance you seek??
 
Yes. So far I have only been out to 1482 yards. I think it was 43 MOA or there abouts. I have another 20 MOA with the reticle if I want to push 1750. However, that is not realistic kill distance so it only is for fun.

Thanks for the info guys.
 
Well 600 is still a long way. I shot my Mtn Lion at 600 and thought about it long and hard before I squeezed that trigger. I thought I had the wind dialed in and I was wrong. That day I got it wrong twice. After I shot the cat I shot 900 yards to confirm. I was 1 MOA both shots due to misreading. The verticle was dead on for both shots. I am learning though and hope to one day be able to hit coyote sized kill spots every time I send it.
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top