In Bad Need of Brass!

Dennis Sawyer

Dennis Sawyer

Well-Known Member
Joined
Apr 2, 2012
Messages
282
Location
North Idaho
Im wondering if anybody would know if its possible right now to find 7 STW Brass? I just had a beautifull gun built by Defensive Edge and cannot find brass for it anywhere. I did find some nosler 8MM remmington Mag brass but am not familiar with necking down brass. Does it have to be done in stages or can I just stick it in the die and do it in one pass. Any help would be appreciated.

Dennis
 
Good luck! You ain't the only one huntin STW brass.

If you find any Nosler STW brass, please shoot me a PM, so I can purchase a box or 2.
 
Dennis Sawyer said:
Im wondering if anybody would know if its possible right now to find 7 STW Brass? I just had a beautifull gun built by Defensive Edge and cannot find brass for it anywhere. I did find some nosler 8MM remmington Mag brass but am not familiar with necking down brass. Does it have to be done in stages or can I just stick it in the die and do it in one pass. Any help would be appreciated.

Dennis
Click to expand...
If you can get 8rem brass get a couple of hundred while you can. The 8rem IS the 7stw's parent case and shouldn't need anything other than light lube to neck down to 7mmstw in a regular FL die. If you were going down from 375 H@H you would have to do a mid step at 30 or 338 but the 8rem should be good in one pass. You also won't really need to fire form as you would for the 375.

I was picking up 7stw brass just a couple of weeks ago at the local shop; they are out at present though.
 
8 mag case with just one pass through your FL 7 STW die and you have your case. No big deal.
 
Can you reform & reshape the necks with a neck-sizer die, or will you have to use a FL sizing die for turning 8mm Rem brass into STW?
 
Tikkamike said:
i just gave away a whole bunch of stw brass i had sitting around. i had no idea so many people needed it...
Click to expand...
****........I sure could have used it. Mine have been loaded and shot so many times, they're splitting 2/3 of the way around about 1/8" up from the belt. LOL
 
Everybody's mentioned the 8mm Rem Mag, but there's actually quite a few cases you can use for this. The 300 H&H, 375 H&H come to mind immediately, but there are several others as well. Should be able to find one of these without too much trouble.
 
Kevin Thomas said:
Everybody's mentioned the 8mm Rem Mag, but there's actually quite a few cases you can use for this. The 300 H&H, 375 H&H come to mind immediately, but there are several others as well. Should be able to find one of these without too much trouble.
Click to expand...
Yep, I've shot a lot of stw's head stamped 375h@h. It takes an intermediate necking step and a fire-form.
 
Kevin Thomas said:
Everybody's mentioned the 8mm Rem Mag, but there's actually quite a few cases you can use for this. The 300 H&H, 375 H&H come to mind immediately, but there are several others as well. Should be able to find one of these without too much trouble.
Click to expand...


Thanks for the info. I would think the 300 H&H would probably size up as easy or easier than the 8mm Rem Mag. I will definitely keep my eyes open for those. Thanks again...
 
I was just on Midway's site and they do have some loaded ammo in 7mmstw for sale; I know it's not as cheap as rolling your own, but you will end up with proper headstamp brass when you are through with them.
 
Warning! This thread is more than 12 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Similar threads

4
Need 35 REM BRASS in a bad way!!
Replies
2
Views
828
450AK
4
S
In need of 7LRM brass.
Replies
1
Views
825
kaseyfied
kaseyfied
W
need help bad?
Replies
6
Views
1K
Sully2
S
J
Need some retumbo bad
Replies
5
Views
1K
Triple BB
T
Trm82
Bad ADG brass ?
2
Replies
23
Views
2K
QuietTexan
QuietTexan

Recent Posts

Top