Rings and base suggestions for Sendero .300 RUM

[emt2x]

I recently purchased a Sendero II in .300 RUM, and followed up with a Vortex Viper PST 4-16x50 FFP.

Any suggestions for Rings and Base (20 MOA)


Thanks!!!!!!!!!!!!gun)

 

[Broz]

I would go with a 20 moa Nightforce rail and Nightforce Ultra Light rings. Unless you wish to go a cheap route and take the chances of the base not being a true 20 MOA, flexing, moving due to poor fit and no recoil lug and the cheap *** screws shearing off.

I have learned this area is worth spending a little extra.

Jeff

 

[emt2x]

Not worried about spending the extra money. Want quality parts! Thanks

I heard I might need some smith work with the night force screws though, any advice?

 

[Broz]

Not worried about spending the extra money. Want quality parts! Thanks

I heard I might need some smith work with the night force screws though, any advice?

Only if you get the one with 8x40 (larger) screws. Then your receiver holes will need re-tapped. If you get the standard one for the 700 REM it will bolt right on. I do apply a light coat of bedding compound to all the bottom of the rails I install. But some people do not.

Jeff

 

[emt2x]

Ok Thanks!

 

[Broz]

Does anyone know if the Sendero II in tapped for 8x40 screws?

No you need the stadard rail. # A112

Nightforce Optics, Inc. |

Jeff

 

[emt2x]

Thanks Again, Just ordered from Midway!, on backorder, but i'll wait

 

[Broz]

Thanks Again, Just ordered from Midway!, on backorder, but i'll wait

I think yo will be pleased. I just ordered another rail and 2 sets of rings this morning too.

Jeff