SOLD/EXPIRED Might need rem 700 243cal bolt

[lineman2002]

I hot loaded my 243 vtr (read my powder scale wrong) and might be in the look out for a bolt if the gun smith can't fix it

 

[Aldon]

PT&G

Might as well upgrade.

 

[lineman2002]

It's just a stock gun it's my sons rifle just need a stock bolt

 

[Tikkamike]

A pt&g bolt will run you about $250 plus the gunamith work of assembling it and souldering on a handle then the rifle wil need re headspaced. If u have the cash you may as well order a custom barrel too. ...or sell it to me. If you want to sell it send me a pm

 

[BillLarson]

I really doubt you need a new bolt.....probably just relap the lugs "IF" they are galled.....
bill larson

 

[lineman2002]

Well I hot loaded it by 10 grains I had to cut the brass out of the bolt with a driemal tool u can see the brass indention in the bolt face extractor was broke too

 

[BillLarson]

Well I hot loaded it by 10 grains I had to cut the brass out of the bolt with a driemal tool u can see the brass indention in the bolt face extractor was broke too

Send it to Greg Tannel........... he`s an expert in rem. bolts.He will fix.... and guaruntee it....

 

[Westex]

I have a new take off factory bolt 125 plus shipping. Thanks! Mark

 

[lineman2002]

I will keep u in mind westex I called my gun smith but haven't heard back from him yet

 

[lineman2002]

Sent u a pm westex