SOLD/EXPIRED 6mm savage

[dragman]

I have my 6mm up for sale. It is a savae 110 long action Blued that has been trued and had trigger work (springs lightend around 8 ounces) has large bolt handle (stainless) It is sitting in a Blue thumbhole boyd feather weight varmint stock (while it fits the stock needs more wood taken out to float the barrel how I would like it.) It has an ER Shaw 6mm 8 twist barrel 26 inches heavy varmint style has 30 rounds shot for break in. Has weaver 20 MOA base and Burris signature Zee rings with a Tasco 6-24 varmint scope on it. Gun looks promising with both H4831SC and Reloader 22 while broken in. Would like $850 for the complete package shipped to your FFL.

edit:
also comes with new die's that have only loaded the 30 rounds.

 

[mrussell]

is that $850 as it sits in the picture?

What grain bullet was you shooting? did you check the velocity on them?

I have one in a rem SA, but I can only load it single shot due to the 95gr VLDs out to far, the mag wont allow them. But it is a shooter.

 

[dragman]

is that $850 as it sits in the picture?

What grain bullet was you shooting? did you check the velocity on them?

I have one in a rem SA, but I can only load it single shot due to the 95gr VLDs out to far, the mag wont allow them. But it is a shooter.

Yes the complete gun scope you see in the picture. I didn't check velocity's I did more break in than testing I used up some 105 Amax's with 4831SC and they shot right @ an inch at 100 yards I also tried 107 sierra's with reloader 22 and they shot .75" @ 100 with a three shot group. Barrel seems to not be picky on bullets. with the long action you can set them out as far as you want.

 

[dragman]

chamber is 6mm remington.
Just got out of the shop and the barrel is fully free floated now. I have a bunch of 105 amax's so I may work up a load I will keep a round count for anyone who is interested.

 

[backwoods83]

Any trades?

 

[dragman]

Trades possible what is it????

 

[backwoods83]

I was just wondering if there was anything specific you may be looking for.

 

[Dogman24]

Those Boyd stocks are superb. I have the identical blue stock on a 110 in .243 Winchester. Its very simple to shave out the material using a dremel with a little time and patience. Just be sure to seal the wood up when done. I shimmed my front action screw after free floating the barrel. Gun went from shooting consistent 1" 5 shot groups with the factory synthetic to nice little 1/4" - 1/2" groups depending on the "heat" behind the bullet. This will make a great rifle for someone.

 

[dragman]

I was just wondering if there was anything specific you may be looking for.

I would take for other guns, good optics, pistols. I am pretty open to a lot of things.

 

[dragman]

SPF