First semi custom 300WSM Pics

Daves762

Well-Known Member
Joined
May 7, 2011
Messages
382
Location
In a Free State
Remi-700 action
Brux #9 Heavy Target 1/10 twist
Slabbed 3 Port Muscle break
Rifle Basix set for 2lbs
B & C Light Tactical Stock
Desert Warrior Cheek Rest
Leupold Mark 4, 6.5-20x50mm TMR
DNZ Freedom Reaper One Piece Mount & Rings.
Built By RSE Custom guns out of 29 palms CA---turnover time was 9 DAYS!!!!
 

Attachments

  • Dec 2011 022.jpg
    Dec 2011 022.jpg
    56.2 KB · Views: 164
  • Dec 2011 030.jpg
    Dec 2011 030.jpg
    49.2 KB · Views: 155
  • Dec 2011 034.jpg
    Dec 2011 034.jpg
    68.9 KB · Views: 158
  • Dec 2011 026.jpg
    Dec 2011 026.jpg
    72.5 KB · Views: 161
  • Dec 2011 025.jpg
    Dec 2011 025.jpg
    71.7 KB · Views: 155
  • Dec 2011 028.jpg
    Dec 2011 028.jpg
    73.3 KB · Views: 162
Broke it in today with several different 180 gr bullet types.

more than one 5 shot one ragged hole group.....but nothing that would impress anyone here....

Once I work up some loads and I have braggable groups I'll put them up....

It's a shooter for sure...
 
Broke it in today with several different 180 gr bullet types.

more than one 5 shot one ragged hole group.....but nothing that would impress anyone here....

Once I work up some loads and I have braggable groups I'll put them up....

It's a shooter for sure...
Around here if it doesn't shoot into the .1's it's junk.
 
Anyone debating on if they want a muzzle brake or not...........................

with 210 gr bullets it kicks like a 223........loud.but almost no recoil...well worth it.
 
Working on some loads for the rifle today.

Berger 210 VLD
Nosler Brass
WVRM primers
Reloader 19 Powder
best groups were with 61.0gr and 62.5 gr.

First pic has 5 shots into it. Second has 4 rounds.

please forgive the 22 holes in the one pic. I had to do something while the barrel cooled.....
 

Attachments

  • 300WSM 002.jpg
    300WSM 002.jpg
    86.4 KB · Views: 174
  • 300WSM 004.jpg
    300WSM 004.jpg
    87.4 KB · Views: 168
Warning! This thread is more than 13 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top