338 300 Hybrid

Joined
May 9, 2010
Messages
9
Location
Montreal
Hi every body,

I want to try the berger 300 hybrid in my trg-42...Someone have a good point to start...powder and seating depth...lightbulb

Thanks
 
What is the chambering Lapua? If so, I would start at 89 gr of H-1000 and work toward 92 grains in 1/2 gr steps. I start seating at .030" off the lands. Then try going in .010" and out .010" and see if it gives you a direction. In my Lapua the Hybrids were not fussy about seating depth, so I setteled for where they had the best ES and that was .015" off the lands.

Jeff gun)gun)
 
What is the chambering Lapua? If so, I would start at 89 gr of H-1000 and work toward 92 grains in 1/2 gr steps. I start seating at .030" off the lands. Then try going in .010" and out .010" and see if it gives you a direction. In my Lapua the Hybrids were not fussy about seating depth, so I setteled for where they had the best ES and that was .015" off the lands.

Jeff gun)gun)

Sorry, yes it's Lapua
Thanks Jeff
 
Warning! This thread is more than 14 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top