Need Scope (NightForce) Help!

Zundel257

Active Member
Joined
Dec 7, 2010
Messages
28
I have a custom 308 that i am looking to put a more powerful scope on. I currently have a Leupold 4.5-14x40mm LR/T on it. My ballistics are

0.00 inch @ 200 yds
-7.5 inch @ 300 yds
-21.6 inch @ 400 yds
-43.6 inch @ 500 yds

I would like to keep the gun zeroed at 200 yds. I see that the Nightforce 8-32 BR has .125 Moa Clicks and only 50 Moa elevation of internal clicks. So does this mean that I will not be able to "click out" to 500 yds? If so then how do i fix this problem? I am pretty new at this kind of stuff so please help.
 
If you put a 20 MOA base on your rifle you should be able to get close to 1,200 yds before you run out of adjustment, with your ballistics

50 MOA ÷ 2 = 25 MOA plus the 20 MOA base = 45 MOA of "UP" adjustment from your 100 or 200 yd zero

With out the 20 MOA base you will run out of adjustment at about 875 yds +/-.

Dave
 
JBM has several online calculators, all you need is bullet dia, weight, BC, and velocity and you can calculate several types of range cards.

If the link below takes you to a page that says "BAD REQUEST" try a different browser as JBM does not play well with "Chrome" and some others.

Dave


JBM - Calculations
 
Just giving you a heads up, check your drops before you assume that your rifle will produce the same speeds. either run it over a chrony or shoot your drops
 
Warning! This thread is more than 14 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top