75gr A-max in 22-250

Ben Larson

New Member
Joined
Oct 27, 2010
Messages
1
Hi all,

Im new to your site and so far have found it helpful, I am looking for a load for a 22-250 t/c with a 1in12 twist. the powder i hoped to use is IMR 4895 with a 75gr A-Max bullet. any help would be greatly appreiciated.
 
I think they will keyhole with the 1-12 twist as they did in my 22-250 rem 700,and my rem model 7 223. They are ment for 1-7/1-8 twist if you can get a couple from a friend try them before buying a box but I think you'll find they keyhole.
 
I think they will keyhole with the 1-12 twist as they did in my 22-250 rem 700,and my rem model 7 223. They are ment for 1-7/1-8 twist if you can get a couple from a friend try them before buying a box but I think you'll find they keyhole.

Yup. Even 1:9 twist isn't always enough. 1:8 and they work just fine.

Fitch
 
Hi all,

Im new to your site and so far have found it helpful, I am looking for a load for a 22-250 t/c with a 1in12 twist. the powder i hoped to use is IMR 4895 with a 75gr A-Max bullet. any help would be greatly appreiciated.

i don't think you can do it. A 22-250 with a 1:12 twist will barely shoot 60 grain bullets
gary
 
Warning! This thread is more than 14 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top