Help on 6mm International

bowhunthard88

Well-Known Member
Joined
Sep 5, 2008
Messages
1,308
Location
Northeast PA
Does anyone have any information on reloading the 6mm International? What cartridge do you use as a starting point for reloading information? What brass do you prefer to start from (it looks like there's a lot of different brass you can start from and either neck up or down).

Also any powder recommendations, bullets?

Thanks.
 
Does anyone have any information on reloading the 6mm International? What cartridge do you use as a starting point for reloading information? What brass do you prefer to start from (it looks like there's a lot of different brass you can start from and either neck up or down).

Also any powder recommendations, bullets?

Thanks.

I always thought the 6mm International was the same as the 6mm-250? Or at least very close. You might want to look in that direction as well.
 
Two or three editions ago Sierra's reloading manual had data on the 6mm International. I will dig it up and get the info to you if you wish.
Semper Fi
 
Two or three editions ago Sierra's reloading manual had data on the 6mm International. I will dig it up and get the info to you if you wish.
Semper Fi

That would be great! Thanks.



On a side note, the 6mm International is pretty much the same as the 6mm-250.

Thanks again.
 
Here's the pics. It's a 6mm International, on a Shilen action, with a 27" SS barrel (1:13" twist). The barrel is in like new condition, internally. Sorry the pics aren't the greatest...

IMG_3226.jpg

IMG_3229.jpg

IMG_3228.jpg

IMG_3222.jpg

IMG_3227.jpg

IMG_3231.jpg
 
I have located the Sierra reloading manual page with the 6mm International information. I have a slight problem though. We just got a new printer/scanner/everything else. We are not seeing eye to eye. I'll work on it later tonight.
Semper Fi
 
Warning! This thread is more than 14 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top