How many rounds between cleaning ?

Down Under Hunter

Well-Known Member
Joined
May 10, 2007
Messages
912
Location
VICTORIA AUSTRALIA
Just interested in everyones thoughts on how many rounds you shoot in between cleaning sessions for premium accuracy.

I shoot a HART 1-10 with 300 smk's. Just undecided about this .

Cheers

DUH
 
Interesting that LR BR guys used to think that cleaning had to be done between each relay and now you have quite a few winners not cleaning until the end of the match with as many as 80 rounds or so going down the tube.

BH
 
I have a Krieger barreled 6br, it does fine going a long time between cleanings. I recently shot a two day f-class match, it went 176 rounds before I cleaned it. It never lost accuracy, but takes longer to clean after that many rounds.
 
Just interested in everyones thoughts on how many rounds you shoot in between cleaning sessions for premium accuracy.

I shoot a HART 1-10 with 300 smk's. Just undecided about this .

Cheers

DUH

Barrels are all different and require different cleaning regiments depending on how quick
they foul.

When possible I clean every 5 to 10 shots, During matches This is not possible so I have
shot 80 to 100 rounds before cleaning.

Accuracy may degrade to an acceptable level and allow you to shoot as much as you
want, But I get my best accuracy after cleaning and one fouling shot.

What I would recomend is, start with a clean barrel and shoot 5 shot groups allowing
the rifle to cool after each 5 shot string and see when/if the accuracy falls of and to what
level. If that level is still acceptable at the distance you intend to shoot. Enjoy !!!.

The down side to shooting lots of rounds is the cleanup time.

J E CUSTOM
 
i'm just guessing but maybe the bigger boo,mers need to be cleaned a little earlier than the smaller rifle that shoot competetive.

I shoot a Remington .300 Ultra mag. 210 berger with a broughton Custom barrel and the maker shoots 1000 Comp and he told me to clean it shoot 2 fowlers then start shooting groups after about 20 rounds clean again he also told me to never brush my barrel EVER he said that with all of the different kinds of chemicals out their today we don't have to brush . so I've never brushed my barrel as of yet and it seems to do just fine. I likie the fact that ive not took a brush of any kind to my barrel:) but that just how I do it.

BIgBuck
 
I clean every 15-20 rounds...works for me. Having said that both JE and Bigbuck make some good points. There are variables, you'll have to play around to find out where that is for your setup.
 
The riflesmith that built my 243AI recommended cleaning every 20 shots. I've tried to stick to that and the rifle is still shooting sub-MOA after over 1000 rounds.
 
I must admit I clean mine when it is being put away for awhile, so it might be after one shot.
I was taught that leaving them uncleaned could cause corrosion in the barrel, NZ's climate is relatively wet. Might be a hangover from the old .303 corrosive primer days.

Stu.
 
Warning! This thread is more than 14 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top