Looking for Tooling

Frank7mm

Well-Known Member
Joined
Mar 26, 2008
Messages
401
Location
PA
I'm in the process of building a new bolt for one of my remmy. I'm thinking of using a savage style extractor in the end of the one locking lug. My question is do they make a single cutter with the correct angles to install this style exractor?
 
Unless you are just looking for something to do why dont you just order one from Pacific Tool and Gauge? I bought one for a Lapua Build Lapua bolt face M16 style extractor fluted. Very nice for less than 250 bucks
 
I'm in the process of building a new bolt for one of my remmy. I'm thinking of using a savage style extractor in the end of the one locking lug. My question is do they make a single cutter with the correct angles to install this style exractor?

The best route would be to install the Savage bolt head on the Remington bolt body. They work like a charm and can be changed out for other calibers.
 
Warning! This thread is more than 14 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top