New Barrel Break In

Geno22

Well-Known Member
Joined
Mar 4, 2007
Messages
87
Location
Noble Ok
Had a Hart barrel installed in a 700 rem, and was told to break it in proper. Well my ols a&& has never done this before an all that I ask other than calling Hart had a different way. What I am tring to say is I would appreciate the proper prosedure. It is a 260 heavy stainless. I do my own reloading and thanks to this site I have learned the rite way to reload. Thank you.
 
Had a Hart barrel installed in a 700 rem, and was told to break it in proper. Well my ols a&& has never done this before an all that I ask other than calling Hart had a different way. What I am tring to say is I would appreciate the proper prosedure. It is a 260 heavy stainless. I do my own reloading and thanks to this site I have learned the rite way to reload. Thank you.

I recomend the shoot and clean method for 8 to 10 rounds or untill the barrel cleans up with only a a few patches.

As you shoot you can feel the barrel getting smoother and fouling less.

The hart should break in with less than 15 shots.

It is a boring process but well worth it.

J E CUSTOM
 
Thanks guys, got 15 rounds loaded up just in case. Will get after it as soon as the scope gets here. Im lucky in a way cause I can step out of my shop and shoot, don't have to worry about driving to the range.
 
I recently bought two Savage rifles 22-250 & 17HMR. Savage had a barrel break in procedure on thier web site which I followed to the "T" for the first time ever. Both rifles are now tack drivers. The 22-250 shoots 2" groups at 300 yards.:)
 
Warning! This thread is more than 15 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top