Triangular barrel

RockyMtnMT

Official LRH Sponsor
Joined
Mar 25, 2007
Messages
7,874
Location
Montana
Hey guys,

Someone may have already commented on this, but I will go ahead anyway.

I saw at the local sporting goods store tonight some Remington rifles with triangular barrels. Is this just a sales gimmick, or is there some merit to the shape?

Thanks,

Steve
 
Guy at the range had one in a 22-250 and said it shoots well. My problem with it is how you gonna replace that barrel if you shoot it out? Ain't nothin wrong with stainless or chrome moly barrels. Its a gimmic.
 
"How you going to replace that barrel when you shoot it out?" I believe that those triangular barrels are SS. Just like you would with any other 700 Rem. You may not be able to get the triangular contour but you could rebarrel it with a Krieger, Shilen, Lilja etc.
 
Seems like in theory, it could reduce weight and maintain decent ridgidity. I dont know for sure, just a thought. The tri-angle shape in and of itself has been proven to be one of if not the strongest designs.

This was my thought exactly. At first I thought it was odd looking, but the shape physically is the strongest. What I don't know is if the triangular shape makes any difference on the 26" tube.

Steve
 
I assume the barrel channel is flat. Am I wrong? Makes no sense for a triangular barrel to sit in a round channel.
 
The points of the triangle are flattened. The barrel is situated so that the top of the triangle is the top of the barrel. Thus the bedded part of the barrel is the bottom of the triangle, so flat not round.

Steve
 
It will be strong, but what about as it heats up(different thicknesses)? Could the different heat dissapations cause some issues? Just posing a question I don't have the answer for.


Brent
 
Warning! This thread is more than 15 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top