204 PD blaster is done

long range dogr

Well-Known Member
Joined
Feb 12, 2009
Messages
781
Location
Eaton, Colorado
It's just a factory remington vls. But here are the specs.

204 ruger
Mcmillan A-3 sniper fill tan mcswirly pattern
Badger ord 20 moa base
Badger ord standard rings
Bushnell elite 4200 tactical 6-24x50 mill dot reticle
Trigger adjusted to 2.5 pounds

Cant wait to get it in a dog town!gun)

[img
DSCN2426.jpg
 
No pet loads as of yet.I've only put 7 rounds through it since i got it put together. I'm gonna try and use one of my buddies pet loads to start.

But i'm having a hard time finding primers! But then again aren't we all.

Do you have any?
 
I can't let go of any primers as thats all i have but my pet load is
32 G V-Max
27.8 grains H-4895
Best group with this load is .327 @ 100yrds
That was shot out of a bone stock rem 700 varminter.
Hope that helps, let us know what works best for you(it seems not very many people hae info for the 204)
 
What primer? And what kind of velocities are you gettin with load?

Thanks for the info.


I'm using Winchester WLR primers but havn't used the chronograph

but getting under half inch 25 round groups using Savage single

shot laminated stock 26 inch barrel
 
Are you planning on useing some 40 grain V-Maxs also, I have a load for them that shot .375 justy haven't had time to play around with that load yet.

I'd like to try it. I just went and bought a few boxes of the 40gr v-maxs.I dont know how they'll shoot?

Basically i'm open to try any pet loads you fellas have.As long as you guys dont mind sharing them.
 
Warning! This thread is more than 15 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top