.300 Win Mag brass?

[TARGETMAN]

Does anyone know where I can get some Lapua or Norma .300 WM brass? Is there any other company that makes QUALITY brass?

 

[Broz]

Like finding hens teeth. I have been running posts on several forums looking too.

I feel the best thig that is available on a daily basis is WW and it is not even close to Lapua.

Good Luck.

Jeff

 

[Lightvarmint]

Like finding hens teeth. I have been running posts on several forums looking too.

I feel the best thig that is available on a daily basis is WW and it is not even close to Lapua.

Good Luck.

Jeff

Hello,

How about nosler?

LV

 

[Broz]

Hello,

How about nosler?

LV

Never tried it, it might be better that WW ? Do no.

.

 

[Lightvarmint]

Never tried it, it might be better that WW ? Do no.

.

Broz,

Nosler is good brass.

I have usied it for the RUM cases and they work great. Haven't lost one yet and pushed some very impressive loads in the 338 RUM.

LV

 

[7mmSendaro]

I just bought Norma 300WM brass from Brunos on line.

 

[MagnumManiac]

I'm using Nosler brass for long range work, and I'm very happy with it.
It's quite a bit heavier than other brands, around 10grs, but it handles high pressures with no problems, although I've had to reduce my loads from other brands.
It's quite good concentrically, and I don't need to weigh them as it has already been done at the factory.
I think you'll be impressed if you give it a go.
Cheers.
MagnumManiac.
gun)

 

[TARGETMAN]

Went to Brunos and purchased some Norma brass, boy it was high! Thanks 7mmSendero.

I also found some Nosler brass at DNR Sports, so I can try out both brands.

Any experience with Hornady brass?

 

[Sludge]

Ill put another word in for Nosler. As others have mentioned, its great stuff. Pretty uniform. Its all I use now.

 

[geargrinder]

Here is a place that has Lapua in stock.

Shipping may be the deal breaker.

Ammunition - Hunting and Outdoor Supplies

 

[Lightvarmint]

Here is a place that has Lapua in stock.

Shipping may be the deal breaker.

Ammunition - Hunting and Outdoor Supplies

They told me last week that they can no longer export ammunition or components to create ammunition. I tried to get them to wiggle on it and they were staunch in their postion.

LV

 

[geargrinder]

They told me last week that they can no longer export ammunition or components to create ammunition. I tried to get them to wiggle on it and they were staunch in their postion.

LV

Don't we have some NZ members that can help us out?

 

[Lightvarmint]

Hello,

NZ must have changed their laws as I have acutally bought guns from this same company through an importer a few years back..... I bought all the P9Ss and the P7M10s they had..

LV

 

[squirrelduster]

I too have tried the Nosler brass an it weighs out good and when you turn the necks they are very even. Not much to remove in the flash hole either. I have shot some groups and most are in the 1/2" to 5/8" range at a hundred with a few in the .382 to .368 as the smallest. These are three shot groups during load work up for a hunting load. 190 Berger VLD.
I have some WW and when I turned the necks there was quite a difference from one side of the neck to the other. Not very concentric. They shoot ok
Try the Nosler brass it's good stuff.