lee31
Well-Known Member
I recently bought some 100 grain Barnes TTSX for my 257 Roberts AI. I have heard how tough and indestructible these bullets are. Well I through a load together for the Wisconsin gun deer season. Load was 50 grains of RL17 and a CCI200 and I was getting 3294fps with a ES of 7 over 5 shots and just under 1MOA. I thought this would be a great load where my shots would range between 50-300 yards. Well I got my opportunity on a good buck on the last Saturday evening of the season.
The buck quartering away at 170 yards away in a cut cornfield just about to go into the woods. I ended up shooting him in the flank and was expecting bullet would come out either in front of the off side shoulder or would end up coming to rest right in his shoulder. The buck hunched up and took off into the woods. I waited 1 hour and went to look for blood. I found a little blood which was very spotty at best. After about 75 yards of tracking I reached our line fence and head something take off. I backed out and called the neighbors.
They said they'd be doing a deer drive in the morning and I was more than welcome to come along. Fast forward to the next day 16 hours later to be exact I caught up to the buck on the drive and had to finish him off. While I was cutting up the deer Tuesday night I found my bullet it had come to rest right under his off side shoulder blade. All the pedals had sheared off or the tip busted one or the other. I was astonished that this would happen. And now know why the deer was still alive as it had just left a 1/4 inch wound channel through the deer.
So I decided to email Barnes and their reply was that I'm probably shooting these bullets to fast and that they dont test bullets past 3000fps. They also told me my impact velocity was probably around 2950fps. And pretty much told me tough luck. I've shot Nosler accubonds outt my 25-06 at faster muzzle velocity than the Barnes and have never had a experience like this. So I'm just giving a heads up to some of you that are running big magnums at higher velocities than I'm running. You might run into this problem. Hopefully not but I will be switching back to accubonds if I can find them or Berger 133's.
The buck quartering away at 170 yards away in a cut cornfield just about to go into the woods. I ended up shooting him in the flank and was expecting bullet would come out either in front of the off side shoulder or would end up coming to rest right in his shoulder. The buck hunched up and took off into the woods. I waited 1 hour and went to look for blood. I found a little blood which was very spotty at best. After about 75 yards of tracking I reached our line fence and head something take off. I backed out and called the neighbors.
They said they'd be doing a deer drive in the morning and I was more than welcome to come along. Fast forward to the next day 16 hours later to be exact I caught up to the buck on the drive and had to finish him off. While I was cutting up the deer Tuesday night I found my bullet it had come to rest right under his off side shoulder blade. All the pedals had sheared off or the tip busted one or the other. I was astonished that this would happen. And now know why the deer was still alive as it had just left a 1/4 inch wound channel through the deer.
So I decided to email Barnes and their reply was that I'm probably shooting these bullets to fast and that they dont test bullets past 3000fps. They also told me my impact velocity was probably around 2950fps. And pretty much told me tough luck. I've shot Nosler accubonds outt my 25-06 at faster muzzle velocity than the Barnes and have never had a experience like this. So I'm just giving a heads up to some of you that are running big magnums at higher velocities than I'm running. You might run into this problem. Hopefully not but I will be switching back to accubonds if I can find them or Berger 133's.