Long Range Hunting Online Magazine


Go Back   Long Range Hunting Online Magazine > Regional Forums > Australia, New Zealand


Reply

Just ordered my 338 EDGE

 
LinkBack Thread Tools Display Modes
  #1  
Old 10-28-2010, 03:25 AM
Bronze Member
 
Join Date: Sep 2010
Location: Victoria, Australia
Posts: 52
Just ordered my 338 EDGE

Hey all,
I am new to this forum, but I have been tinkering with the idea about building a LRH rifle for a while now, and then the 338 EDGE reared it's head up and I liked it haha, so any way....

I have ordered a PSECO rifle made by John Giles, Heavy fluted 30" lija barrel, Stiller Predator Tactical action, McMillan A-4 Stock with thumbwheel cheekpiece, vias brake I know this will kick **** up all over the joint but a simple pack laid underneath with stop this.

So yeah pretty excited and can't wait to get hold of this puppy.

Someday soon I'll be in the Aussie EDGE club too
Reply With Quote
  #2  
Old 10-28-2010, 05:47 AM
Silver Member
 
Join Date: May 2009
Location: Melbourne Australia
Posts: 136
Re: Just ordered my 338 EDGE

Quote:
Originally Posted by Aussie LRH View Post
Hey all,

I have ordered a PSECO rifle made by John Giles, Heavy fluted 30" lija barrel, Stiller Predator Tactical action, McMillan A-4 Stock with thumbwheel cheekpiece, vias brake I know this will kick **** up all over the joint but a simple pack laid underneath with stop this.

So yeah pretty excited and can't wait to get hold of this puppy.

Someday soon I'll be in the Aussie EDGE club too
Hi Aussie LRH,

You mention an impressive selection of top quality hardware but no mention on make of trigger????.
I ordered my custom built long range rifle some time back and know that feeling very well...."I can't wait to get hold of my puppy" also.
I am sure the wait will be worth it.
Welcome to the club.
Reply With Quote
  #3  
Old 10-30-2010, 11:08 PM
Bronze Member
 
Join Date: Sep 2010
Location: Victoria, Australia
Posts: 52
Re: Just ordered my 338 EDGE

So I did RR, the trigger will be a Jewell HVR with top safety.

Might be getting a 338 Lapua very soon too all the same gear but A-5 stock and 26" Lija barrel, no doubt you will all know when it happens
Reply With Quote
  #4  
Old 10-31-2010, 06:26 AM
Platinum Member
 
Join Date: Nov 2008
Posts: 1,047
Re: Just ordered my 338 EDGE

Aussie LRH,
You will love the Edge, great calibre. Good component list too.
Not a great choice of brake though for this calibre. 90 to 100 grains of powder being burnt requires an effective brake. You can do much better.

A few of the sponsors on this site make very good brakes.

Why did you pick a Vias brake.
__________________
scientia est potentia
Reply With Quote
  #5  
Old 10-31-2010, 04:08 PM
Bronze Member
 
Join Date: Sep 2010
Location: Victoria, Australia
Posts: 52
Re: Just ordered my 338 EDGE

Quote:
Originally Posted by Topshot View Post
Aussie LRH,
You will love the Edge, great calibre. Good component list too.
Not a great choice of brake though for this calibre. 90 to 100 grains of powder being burnt requires an effective brake. You can do much better.

A few of the sponsors on this site make very good brakes.

Why did you pick a Vias brake.
I will only need it during range sessions, I have emailed the guys at centre shot rifles about getting a Muscle brake for it so in the mean time it will be a vais until I hear back from them.
Reply With Quote
  #6  
Old 10-31-2010, 07:59 PM
Gold Member
 
Join Date: Jun 2010
Location: Bakersfield, Ca
Posts: 554
Re: Just ordered my 338 EDGE

Dont overlook the Holland QD Brake either.
__________________
"I'm interested in rifles, but only accurate rifles are interesting". Col. Townsend Whelen
Reply With Quote
  #7  
Old 10-31-2010, 09:09 PM
Silver Member
 
Join Date: Jan 2009
Posts: 136
Re: Just ordered my 338 EDGE

When I spoke to John nine months ago he had never heard of a .338 edge.

He was prepared to build it but he he did not have a reamer and wouldnt buy one for me as he said he wouldn't use it. So I had that extra expense.

Things must have changed......!

Mine is 2 weeks away from completion... Lawton match barrel is already reamed!

The Vias braked put me off also. You will need a V port , de type brake.. John wouldnt fit another type hence I didnt go ahead.

You seen the other brakes are lot harder to fit and need to be indexed precisley..

Its not just a matter of building a .308 on a Remy action..

Last edited by signature542; 10-31-2010 at 09:14 PM.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes


Similar Threads for: Just ordered my 338 EDGE
Thread Thread Starter Forum Replies Last Post
I ordered an 11'' twist .30 Pat B. Rifles, Bullets, Barrels and Ballistics 8 03-05-2011 01:15 AM
Ordered my first reamer !!! bigngreen Gunsmithing 16 05-19-2010 05:12 PM
Just ordered new scope. joseph Long Range Scopes and Other Optics 7 02-04-2010 04:35 AM
ordered new chronograph, now what 243yote Rifles, Bullets, Barrels and Ballistics 13 10-19-2009 06:33 AM
Have ordered Rem 700 PSS .300 RUM pc Long Range Hunting & Shooting 8 01-09-2006 07:54 AM

Current Poll
I currently have hunting preference points in the following states

All times are GMT -5. The time now is 06:34 AM.


Powered by vBulletin ©2000 - 2014, Jelsoft Enterprises Ltd.
Content Management Powered by vBadvanced CMPS
All content ©2010-2014 Long Range Hunting, LLC