Re: I'm in the Edge Aussie club
Thought it was mission impossible for a while there but all is good now.
I ripped out the bedding from under the barrel and this got rid of the hot barrel fliers.
I then dropped the action hold down screw torque settings from 65 in/lb down to 47 in/lb and it now shoots into the one ragged hole at 100 yards with 92 grains of AR2217 and Remington brass.
Now that I have a workable load for the rifle, I am looking for some Norma .300RUM brass so that I can work out a second load for the rifle up near the 98 grain mark.
If you see any Norma brass about, please let me know.
Also lets see some pictures of your new cannon asap............
scientia est potentia