Long Range Hunting Online Magazine

Go Back   Long Range Hunting Online Magazine > Chatting and General Stuff > Member Introductions

Member Introductions Tell us about yourself. Include your Location in the thread title.


zeke 284

LinkBack Thread Tools Display Modes
Unread 08-03-2012, 08:01 AM
Junior Member
Join Date: Jul 2012
Posts: 1
zeke 284

I picked up some 300 H and H mag brass and have sized the neck only until the case is tight (touching the 30 cal part of the shoulder).
this is to be fire formed in a 257stw rifle.
I need to know what would be a good load for this.
I have a very wide selection of powders on hand.
The 300 h mg brass is on 25 thousandsth shorter .I am considering using standard load data for the 257 this case is about 1/3 inch shorter.
Can anyone help,please ?
Reply With Quote
  • Reply


    Thread Tools
    Display Modes

    All times are GMT -5. The time now is 09:34 AM.

    Powered by vBulletin ©2000 - 2017, Jelsoft Enterprises Ltd.
    Content Management Powered by vBadvanced CMPS
    All content ©2010-2015 Long Range Hunting, LLC