I was shooting this rifle last winter but have since changed it to what you see in the pics. I came to me with the standard 721 action,trigger & safety, blued action with the barrel stainless and a beautiful piece of wood that Nate had inletted and pillar bedded. I spent a ton of time finishing the stock and just couldn't take it out because I'm hard on stuff. So I found a used HS on ebay had Nate finish the rest.
When I get the checkering done on the wood I'll post a pic.
I haven't done much load developement as of yet. The load I found last fall shoots .410 for three.
The load is
140 grain A-Max
50.5 grains RL-17
CCI BR primer
Velocity: 3125 @ 50 degrees.
Scope was 3.5x10x40 leupold tactical
This load is pretty hot and was fine for coyote hunting
during the winter but I need to find a lower pressure one for antelope and deer in case the temps are higher.
The first shot I took with this rifle on a critter was on a coyote at 742 and drilled it.
The next was on a fox at 695, missed the first round but got him on the second.
The third round took out a coyote at 660. All were in the same day. So I am really happy with the rifle. I took a few others from 400-600 before I started working on it again.